；Rotork Profibus DP模块的GSD文件-版本1;；1998年10月;；关于Rotork ProfiBus DP模块的详细描述，请参阅;Rotork文件S420E - ProfiBus DP模块技术手册;；# Profibus_DP;Vendor_Name = "Rotork Controls Ltd" Model_Name = "驱动器DP接口" Revision = "1.01" Ident_Number = 0x073A Protocol_Ident = 0 Station_Type = 0 fms_sup0 Hardware_Release = "42580/82-**" Software_Release = "N1**"; ; ; Supported Transmission rates ; 9.6_supp = 1 93.75_supp = 1 187.5_supp = 1 19.2_supp = 1 500_supp = 1 1.5M_supp = 1 12M_supp = 0 MaxTsdr_9.6 = 60 MaxTsdr_19.2 = 60 MaxTsdr_93.75 = 60 MaxTsdr_187.5 = 60 MaxTsdr_500 = 100 MaxTsdr_1.5M = 150 MaxTsdr_12M = 800 ; ; ; Slave Information ; Redundancy = 1 Repeater_Ctrl_Sig = 1 24V_Pins = 0 Freeze_Mode_supp = 1 Sync_Mode_supp = 1 Auto_Baud_supp = 1 Set_Slave_Add_supp = 1 User_Prm_Data_Len = 9 ; ; Parameter data: ; Special byte for SPC3, POSALS, POSMIN, POSMAX, POSDBD, POSMIT, AUXMSK, LOSPOS, DPSLTO User_Prm_Data = 0x00, 0x00, 0x00, 0xFF, 0x32, 0x05, 0x0F, 0x00, 0xFF Min_Slave_Intervall = 1 Modular_Station = 0 Max_Module = 2 Max_Input_Len = 12 ;12 bytes of data slave to master Max_Output_Len = 6 ;6 bytes of data master to slave Max_Diag_Data_Len = 12 ;5 bytes of User diagnostics ; ; ; Module Information ; Module = "IQ module" 0x81, 0x05, 0x00, 0x1b ;12 Inputs, 6 Outputs EndModule Module = "AQ/Q module" 0x81, 0x05, 0x01, 0x1b ;12 Inputs, 6 Outputs EndModule